Direkt zum Hauptbereich

ICE Resin & IndigoBlu Blog Hop

INDIGO ICE blog hop header

Welcome to the blog hop of ICE Resin and IndigoBlu.

bookmark04

Please check all my fellow crafters from this hop, you can find all bloglinks on the bottom of this post.

For the hop I made a combination of ornament and bookmark, both make a pretty and clever gift wrap.

It always makes me sad to see any pretty wrapping paper torn off my christmas presents. This wrapping is permanent: First I took some of my favorite wrapping paper and put it around the book as if I want to make a new cover.

While wrapping the book I added a ribbon to each side of the cover. I made a bow and ‚closed‘ the book, because the lucky recipient should not sneak into the book before xmas.

Opening the bow will add the feeling of ‚unwrapping‘ the present. And the best part: You can do it again and again!

bookmark03The finished wrap has got an extra shine with a beautiful detailed stamp from IndigoBlu and StazOn ink.

 

The bird was stamped and colored with Memento (Imagine Crafts/Tsukineko) on glossy coated paper.

 

The glossy finish will prevent the paper from becoming translucent when treated with resin. I embellished the bird with some FlitterGlu and Megaflakes from IndigoBlu before the resin was added.

 

 

bookmark08

The bird was glued in place where it can be found on the original stamp (you can find the stamp HERE.). The ribbon (May Art) that I have attached to the bird can be pulled through the book and serves as bookmark.

A second bird was treated the same way and embellished with a ribbon bow to make an ornament, it is a nice extra for the gift.

bookmark06

bookmark09

Thank you ICE Resin and IndigoBlu for this amazing opportunity!

Here are the other blogs and days of the hop:

Thursday:
 
 
 
 
Friday:
 
 
Carol La Valley http://wp.me/p1MCno-3st
 
John Creighton Petersen http://artnewwave.com/?page_id=468
 
Saturday:
 
Baerbel Born – YOU ARE HERE 🙂
         
 
Kay Halliwell-Sutton – http://www.indigoblu.com/blog/?p=6341
 

Kommentare

Beliebte Posts aus diesem Blog

Frühlingsgrüße mit einem 3D-gedruckten Hasen-Salzstreuer!

  Der Frühling liegt in der Luft, und was gibt es Schöneres, als ihn mit entzückenden Dekorationen zum Thema Hase zu feiern? Wenn du einen 3D-Drucker hast, erwartet dich ein besonderes Vergnügen! Stell dir vor, deiner Küche oder deinem Esstisch mit einem charmanten, individuell gestalteten Hasen-Salzstreuer einen Hauch von Laune zu verleihen. Der 3D-Druck eröffnet unendliche Möglichkeiten, einzigartige und personalisierte Gegenstände zu kreieren. Ob du ein minimalistisches Design, einen niedlichen und cartoonartigen Hasen oder sogar einen Vintage-inspirierten Look bevorzugst, auf Makerworld kannst du ein 3D-Modell finden oder entwerfen, das perfekt zu deinem Stil passt. Für euren Ostertisch habe ich dieses Modell für euch entworfen: Diese 3D-gedruckten Hasen-Salzstreuer sind nicht nur entzückend anzusehen, sondern auch funktional. Du kannst einen einzelnen Hasen für Salz drucken oder ein Paar erstellen, um sowohl Salz als auch Pfeffer aufzubewahren.  Das Modell findet ihr für ...

Stempeln für Ostern | Serviettentechnik

Vor einigen Jahren habe ich dieses Tutorial auf YouTube gemacht, wie man schnell und effektiv Osterdekorationen basteln kann. Viel Spaß dabei!

3D Drucke für Ostern Livestream

Livestreamen ist nicht nur etwas für die junge Generation. Wenn eine Oma OBS (Oma Betriebssystem (Scherz)) bedienen kann, dann kann sie auch streamen. Und diese Oma kann! Wer den neusten Stream verpasst hat, dem kann ich helfen: